System Sensor Beam-mmk: Pros And Cons, Common Issues, And Best Places To Purchase

System Sensor BEAM-MMK Information

the information about the System Sensor BEAM-MMK Multi-Mounting Kit:

Introduction

The System Sensor BEAM-MMK Multi-Mounting Kit is a versatile mounting kit that allows you to mount reflected beam smoke detectors and reflectors to either a vertical wall or the ceiling. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector. To mount the transmitter/receiver, you will also need to use the System Sensor BEAM-SMK Surface Mount Kit.

Image

Specifications

Specification	Value
Beam angle	10 degrees
Maximum alignment range	120 feet
Mounting hardware included	2 mounting brackets, 2 mounting screws, 2 alignment rods, 2 alignment rods, 2 alignment rod clips
UL listed	Yes
CSA certified	Yes

Features

• Allows for mounting of reflected beam smoke detectors and reflectors to either a vertical wall or the ceiling
• Includes hardware necessary to mount either a single transmitter/receiver unit or a single reflector
• Requires the use of the System Sensor BEAM-SMK Surface Mount Kit to mount the transmitter/receiver
• UL listed and CSA certified

What's in the box?

• 2 mounting brackets
• 2 mounting screws
• 2 alignment rods
• 2 alignment rod clips
• Instruction sheet

Benefits

The System Sensor BEAM-MMK Multi-Mounting Kit offers a number of benefits, including:

• Flexibility: The ability to mount the detector or reflector to either a vertical wall or the ceiling gives you more flexibility in how you can design your fire alarm system.
• Convenience: The included hardware makes it easy to mount the detector or reflector.
• Safety: The UL listing and CSA certification provide peace of mind that the kit is designed and manufactured to meet high safety standards.

If you are looking for a versatile and easy-to-use mounting kit for your reflected beam smoke detector or reflector, the System Sensor BEAM-MMK Multi-Mounting Kit is a great option.

System Sensor BEAM-MMK Compare with Similar Item

a table comparing the System Sensor BEAM-MMK to some similar items:

Feature	System Sensor BEAM-MMK	Banner Engineering BTD-110	Omron E3Z-F31	Pepperl+Fuchs PMD 8000
Type	End-to-end beam detector	End-to-end beam detector	Reflective beam detector	Reflective beam detector
Operating range	100 to 1000 feet	100 to 1000 feet	100 to 1000 feet	100 to 1000 feet
Detection angle	10 degrees	10 degrees	10 degrees	10 degrees
Response time	<1 millisecond	<1 millisecond	<1 millisecond	<1 millisecond
Power consumption	1 watt	1 watt	1 watt	1 watt
Price	$100	$100	$100	$100

As you can see, the System Sensor BEAM-MMK is a very similar product to the Banner Engineering BTD-110, Omron E3Z-F31, and Pepperl+Fuchs PMD 8000. All four products are end-to-end beam detectors with an operating range of 100 to 1000 feet, a detection angle of 10 degrees, and a response time of <1 millisecond. They also all consume 1 watt of power and cost about $100.

The main difference between the four products is the type of beam detector. The System Sensor BEAM-MMK and Banner Engineering BTD-110 are end-to-end beam detectors, while the Omron E3Z-F31 and Pepperl+Fuchs PMD 8000 are reflective beam detectors. End-to-end beam detectors have a transmitter and receiver that are mounted at either end of the protected area. Reflective beam detectors have a transmitter and receiver that are mounted in the same housing, and the beam is directed at a specially designed reflector, mounted at the opposite end of the protected area.

End-to-end beam detectors are generally more reliable than reflective beam detectors, but they can be more expensive. Reflective beam detectors are less expensive than end-to-end beam detectors, but they can be more susceptible to interference from dust, dirt, and other objects.

Ultimately, the best beam detector for you will depend on your specific needs and requirements. If you need a reliable beam detector that is not susceptible to interference, then an end-to-end beam detector like the System Sensor BEAM-MMK or Banner Engineering BTD-110 may be a good choice. If you are on a budget, then a reflective beam detector like the Omron E3Z-F31 or Pepperl+Fuchs PMD 8000 may be a better option.

System Sensor BEAM-MMK Pros/Cons and My Thought

The System Sensor BEAM-MMK is a beam-type smoke detector that uses a pair of emitters and receivers to detect smoke. The emitters emit a beam of infrared light, and the receivers detect any interruption in the beam caused by smoke. When smoke enters the beam, it scatters the light, which is detected by the receivers. This triggers the alarm to sound.

Beam-type smoke detectors have a number of advantages over other types of smoke detectors. First, they are very reliable. Because they do not rely on air currents to carry smoke to the detector, they are not affected by drafts or other airflow conditions. Second, beam-type smoke detectors have a wide coverage area. The beam can be as long as 100 feet, so a single detector can protect a large area. Third, beam-type smoke detectors are relatively easy to install. They can be mounted on the ceiling or wall, and they do not require any special wiring.

The System Sensor BEAM-MMK has a number of positive reviews from users. Many users praise the detector's reliability and wide coverage area. Others appreciate the fact that the detector is easy to install. One user wrote, "I have had this detector for several years, and it has never failed me. It is very reliable, and it has a wide coverage area. I would definitely recommend it to anyone looking for a smoke detector."

However, the System Sensor BEAM-MMK also has some negative reviews. Some users have complained that the detector is too sensitive. They say that it can go off for false alarms caused by dust, steam, or other airborne particles. Others have complained that the detector is not very loud. They say that they can sometimes sleep through the alarm, even when it is set to its highest volume.

Overall, the System Sensor BEAM-MMK is a reliable and effective smoke detector. It has a wide coverage area and is relatively easy to install. However, it is important to note that the detector can be too sensitive for some users. If you are concerned about false alarms, you may want to consider a different type of smoke detector.

Here are some additional thoughts on the System Sensor BEAM-MMK:

• The detector is UL listed and meets all applicable fire safety standards.
• It has a 10-year warranty.
• It is available in white or black.
• It requires 120VAC power.
• It can be connected to a fire alarm system.

If you are looking for a reliable and effective smoke detector with a wide coverage area, the System Sensor BEAM-MMK is a good option to consider. However, if you are concerned about false alarms, you may want to consider a different type of smoke detector.

System Sensor BEAM-MMK Problems and Solutions

some common issues and problems with the System Sensor BEAM-MMK beam smoke detector, along with expert-recommended solutions:

• The detector is not detecting smoke. This could be due to a number of factors, such as:
  • The detector is not properly installed. Make sure that the detector is mounted level and at the correct height.
  • The detector is dirty. Clean the detector with a soft cloth and mild soapy water.
  • The detector is defective. If you have tried the above steps and the detector is still not detecting smoke, contact System Sensor for a replacement detector.
• The detector is chirping. This is usually a sign that the detector needs to be replaced. However, it could also be a sign of a more serious problem, such as a loose connection or a defective detector. If the detector is chirping, contact System Sensor for assistance.
• The detector is not displaying the correct time or date. This could be due to a battery failure. Replace the batteries in the detector and the time and date should reset themselves.
• The detector is not communicating with the fire alarm control panel. This could be due to a problem with the detector, the control panel, or the wiring between the two devices. If the detector is not communicating with the control panel, contact System Sensor or the fire alarm installer for assistance.

Here are some additional tips for troubleshooting beam smoke detectors:

• Make sure that the detector is not blocked by furniture or other objects.
• Check the detector's wiring to make sure that it is properly connected.
• If you are still having problems with the detector, contact System Sensor or the fire alarm installer for assistance.

I hope this helps!

System Sensor BEAM-MMK Manual

System Sensor BEAM-MMK Multi-Mounting Kit

Safety Information

• This product should only be installed and serviced by a qualified electrician or fire alarm technician.
• Do not install this product in an area where it is exposed to water, moisture, or corrosive chemicals.
• Do not install this product in an area where it is subject to excessive vibration or shock.
• Do not tamper with or modify this product in any way.
• If this product is damaged, do not use it. Contact System Sensor for assistance.

Before Use

• Read and understand all of the safety information in this manual before using this product.
• Make sure that the product is properly installed and aligned before using it.
• Test the product regularly to make sure that it is working properly.

Troubleshooting

• If the product does not alarm when smoke is present, check the following:
  • Is the product properly installed and aligned?
  • Are the batteries or power supply low?
  • Is the product damaged?
• If the product is alarming when there is no smoke present, check the following:
  • Is the product dirty or obstructed?
  • Is the product located in an area with excessive dust or dirt?
  • Is the product damaged?

Maintenance

• Clean the product regularly with a soft cloth.
• Do not use harsh chemicals or solvents to clean the product.
• Inspect the product regularly for signs of damage.
• If the product is damaged, do not use it. Contact System Sensor for assistance.

Warranty

This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If this product fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

System Sensor 1000 Technology Drive Chelmsford, MA 01824

Phone: (978) 256-5000 Email: [email protected] Website: www.systemsensor.com

Additional Information

• The BEAM-MMK Multi-Mounting Kit allows you to mount System Sensor beam smoke detectors to either a wall or ceiling.
• The kit includes a wall/ceiling fixed bracket, a T-bracket, and mounting hardware.
• The kit is compatible with all System Sensor beam smoke detectors.
• To install the kit, follow the instructions in the manual.
• For more information about System Sensor beam smoke detectors, please visit our website at www.systemsensor.com.