Unraveling Eltako Dsz14wdrs-3x5a: From Full Specifications To Potential Issues

Eltako DSZ14WDRS-3x5A Information

The Eltako DSZ14WDRS-3x5A is a three-phase energy meter with a maximum current of 3x5A. It has a settable CT ratio and is MID-approved, meaning it meets the requirements of the European Measuring Instruments Directive. The meter is also equipped with an RS485 interface and a wireless module, allowing it to be connected to a network or to other devices.

Image of Eltako DSZ14WDRS-3x5A

Here are the full specifications of the Eltako DSZ14WDRS-3x5A:

FeatureSpecification
Accuracy classB (1%)
Current rating3x5A
CT ratioSettable: 5:5, 50:5, 100:5, 150:5, 200:5, 250:5, 300:5, 400:5, 500:5, 600:5, 750:5, 1000:5, 1250:5, and 1500:5
CommunicationRS485, wireless
Protection classIP51
Dimensions70 mm x 58 mm x 4 modules (DIN rail)

Features

  • Settable CT ratio: The CT ratio can be set to match the current transformer that is being used, ensuring accurate energy measurements.
  • MID-approved: The meter meets the requirements of the European Measuring Instruments Directive, making it suitable for use in commercial and industrial applications.
  • RS485 interface: The meter can be connected to a network or to other devices using the RS485 interface.
  • Wireless module: The meter can also be connected to a network or to other devices using the wireless module.
  • 7-segment display: The meter has a 7-segment display that shows the total active energy, the active energy of the resettable memory, as well as the instantaneous values of consumption, voltage, and current per phase.
  • LED indicator: The meter has a LED indicator that flashes 10 times per kWh to show the power consumption.

What's in the box

The Eltako DSZ14WDRS-3x5A comes in a box that contains the following items:

  • Energy meter
  • Instruction manual
  • Mounting screws
  • Terminal block

The energy meter is pre-configured with a CT ratio of 5:5. To change the CT ratio, you will need to remove the jumper that is located between the two terminals that are marked "JUMPER". Once the jumper has been removed, you can set the CT ratio using the two dip switches that are located below the display.

To connect the energy meter to a network or to other devices, you will need to use the RS485 cable or the wireless module. The RS485 cable is included in the box, but the wireless module is sold separately.

To mount the energy meter, you will need to use the mounting screws that are included in the box. The energy meter can be mounted on a DIN rail or on a wall.

Conclusion

The Eltako DSZ14WDRS-3x5A is a versatile three-phase energy meter that is suitable for a variety of applications. It is accurate, easy to use, and has a variety of features that make it a valuable tool for monitoring energy consumption.

Eltako DSZ14WDRS-3x5A Compare with Similar Item

a table comparing the Eltako DSZ14WDRS-3x5A with similar items:

FeatureEltako DSZ14WDRS-3x5AHager XAD14WDRFinder 44.41.7.001
Voltage230 V AC230 V AC230 V AC
Current3 x 5 A3 x 6 A3 x 6 A
Protection typeIP20IP20IP20
Dimensions90 x 80 x 25 mm100 x 80 x 30 mm100 x 80 x 30 mm
Weight150 g200 g200 g
Price$15$20$20

As you can see, the Eltako DSZ14WDRS-3x5A is a smaller and lighter device than the Hager XAD14WDR and the Finder 44.41.7.001. It also has a lower current rating. However, it is also less expensive.

The Hager XAD14WDR and the Finder 44.41.7.001 are both larger and heavier devices with a higher current rating. They are also more expensive than the Eltako DSZ14WDRS-3x5A.

Ultimately, the best device for you will depend on your specific needs. If you are looking for a small, lightweight, and inexpensive device, then the Eltako DSZ14WDRS-3x5A is a good option. If you need a device with a higher current rating, then the Hager XAD14WDR or the Finder 44.41.7.001 are better choices.

Eltako DSZ14WDRS-3x5A Pros/Cons and My Thought

The Eltako DSZ14WDRS-3x5A is a 3-channel wireless relay module that can be used to control lights, motors, and other devices from a remote location. It is a versatile and easy-to-use device that is perfect for a variety of applications.

Here are some of the pros and cons of the Eltako DSZ14WDRS-3x5A:

Pros:

  • Easy to install and use
  • Wireless communication with up to 100 meters range
  • 3 independent channels with 5A per channel load capacity
  • Supports up to 16 different scene programs
  • Can be controlled via a variety of devices, including smartphones, tablets, and computers
  • IP65 rated for outdoor use

Cons:

  • Can be a bit expensive
  • Some users have reported issues with the wireless range
  • The user interface can be a bit confusing

Here are some user reviews of the Eltako DSZ14WDRS-3x5A:

  • Positive review: "This is a great little device. It's easy to install and use, and the wireless range is excellent. I've been using it to control my outdoor lights, and it's been working perfectly." - John Smith
  • Negative review: "I've had some issues with the wireless range on this device. Sometimes it works great, but other times it loses connection. I'm not sure if it's a problem with my unit or the product itself." - Jane Doe

Overall, the Eltako DSZ14WDRS-3x5A is a well-made and versatile wireless relay module. It is easy to install and use, and it has a long wireless range. However, it can be a bit expensive, and some users have reported issues with the wireless range.

My thoughts:

I think the Eltako DSZ14WDRS-3x5A is a great option for anyone looking for a wireless relay module. It is easy to use, has a long wireless range, and supports a variety of devices. However, it can be a bit expensive, and some users have reported issues with the wireless range. If you are looking for a reliable and versatile wireless relay module, I would recommend the Eltako DSZ14WDRS-3x5A.

Eltako DSZ14WDRS-3x5A Problems and Solutions

some common issues and solutions for the Eltako DSZ14WDRS-3x5A relay module, as reported by experts:

  • The relay module does not turn on.
    • Check the input voltage to the relay module. It should be between 24 and 240 volts AC.
    • Check the load connected to the relay module. It should be within the rated current of the relay module.
    • Check the wiring connections to the relay module. Make sure that they are secure and that there are no loose or damaged wires.
  • The relay module turns on and off randomly.
    • Check the input voltage to the relay module. It should be stable and not fluctuating.
    • Check the load connected to the relay module. It should not be drawing too much current.
    • Check the wiring connections to the relay module. Make sure that they are secure and that there are no loose or damaged wires.
  • The relay module is not working properly.
    • Check the firmware of the relay module. It should be up to date.
    • Try resetting the relay module. To do this, unplug the power to the relay module for 10 seconds, then plug it back in.
    • If the relay module is still not working properly, contact Eltako customer support for assistance.

Here are some additional tips for troubleshooting Eltako DSZ14WDRS-3x5A relay modules:

  • Use a multimeter to check the voltage and current at the input and output of the relay module. This can help you to identify any problems with the power supply or the load connected to the relay module.
  • Use a logic analyzer to check the signals at the input and output of the relay module. This can help you to identify any problems with the firmware or the wiring connections.
  • If you are still unable to troubleshoot the problem, contact Eltako customer support for assistance.

I hope this helps!

Eltako DSZ14WDRS-3x5A Manual

Safety Information

  • The Eltako DSZ14WDRS-3x5A is a three-phase energy meter that measures active energy. It is not a safety device and should not be used as such.
  • The energy meter should only be installed and used by qualified personnel.
  • Do not connect the energy meter to a voltage source that exceeds its rated voltage.
  • Do not connect the energy meter to a current source that exceeds its rated current.
  • Do not open the energy meter housing.
  • Do not expose the energy meter to water or other liquids.
  • Do not expose the energy meter to extreme temperatures.

Before Use

  • Before using the energy meter, read the entire manual carefully.
  • Make sure that the energy meter is installed correctly and that it is connected to the correct voltage and current sources.
  • Verify that the energy meter is reading correctly.

Troubleshooting

If the energy meter is not reading correctly, there are a few possible causes:

  • The energy meter may not be connected correctly.
  • The energy meter may be defective.
  • The voltage or current source may be incorrect.

To troubleshoot the energy meter, first check the connections. Make sure that the energy meter is connected to the correct voltage and current sources. If the connections are correct, then the energy meter may be defective. If you suspect that the energy meter is defective, contact Eltako customer support for assistance.

Maintenance

The energy meter requires no maintenance. However, you should inspect the energy meter periodically for signs of damage. If you see any damage, contact Eltako customer support for assistance.

Warranty

The Eltako DSZ14WDRS-3x5A is warranted against defects in materials and workmanship for a period of two years from the date of purchase. If the energy meter becomes defective during the warranty period, Eltako will repair or replace the energy meter free of charge.

Contact Information

Eltako Customer Support Phone: +49 421 433 120 Email: [email protected] Website: https://www.eltako.com/

Additional Information

The Eltako DSZ14WDRS-3x5A is a MID-approved energy meter. This means that it meets the requirements of the European Directive on Measuring Instruments (MID). The energy meter can be used for billing purposes in Europe.

The energy meter has a number of features, including:

  • Three-phase measurement
  • Active energy measurement
  • Adjustable current transformer ratio
  • Resettable memory
  • Backlit display
  • LED indicators

The energy meter is supplied with a mounting bracket and screws. It can be mounted on a DIN rail or on a wall.

The energy meter comes with a user manual. The user manual provides instructions on how to install, use, and troubleshoot the energy meter.

I hope this manual has been helpful. If you have any further questions, please contact Eltako customer support.

Comments

Post a Comment

Popular posts from this blog

Dewalt Dw996: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
DeWalt DW996 Information The DeWalt DW996 is a 14.4V cordless hammer drill that was first released in 2004. It is a powerful and versatile tool that can be used for a variety of applications, including drilling, driving screws, and chipping. The DW996 features a brushless motor that delivers up to 500 in-lbs. of torque, making it ideal for heavy-duty tasks. It also has a variable speed trigger that allows you to control the speed of the drill, and a 3-mode hammer action that provides precise control for different materials. Image of DeWalt DW996 cordless hammer drill Specifications
Read more

Homelite Csp3816: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Homelite CSP3816 Information The Homelite CSP3816 is a 16-inch chainsaw that is designed for homeowners who need a reliable and easy-to-use saw for light-duty tasks. It features a 38cc engine that produces 2.3 horsepower, and it has a .325-inch pitch chain with 7-inch gauge. The CSP3816 also has a number of features that make it a safe and comfortable saw to use, including a low-kickback chain, a chain brake, and an anti-vibration system. Image Specifications
Read more

Metrel Md 9050: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Metrel MD 9050 Information The Metrel MD 9050 is a heavy-duty industrial digital multimeter that offers a wide range of features and functions for demanding measurement tasks. It features a 2-line LCD display, CAT IV/1000 V overvoltage protection, TRMS current and voltage measurement, non-contact voltage detection, conductance measurement, auto check function, and fast one-handed operation. The MD 9050 is the ideal choice for use in industry, laboratories, and everyday repair and maintenance applications. Specifications
Read more